R134 Skid Loader

  • Height to Hinge Pin - Fully Raised: 2794 mm
  • Rated Operating Capacity: 612 kg
  • Gross Power: 36.4 kW
Find a Dealer Request More Info
Gehl R134 Skid Loader

Performance

Net Power N/A 
Maximum Torque 142 Nm
Rated Operating Capacity 612 kg

Operator's Cabin

The R134 features a new, state-of-the-art, fully-adjustable operator's cab.

  • Sound reduction material within the cab suppresses outside noise for a quieter operator environment.
  • A front-lifting restraint bar with integrated armrests provides personalized comfort and increased safety.
  • Standard high-back adjustable seat and optional air-ride suspension seat or mechanical suspension seat provide enhanced, all-day comfort.
  • Cab forward design enhances view to the bucket edge. Lowered rear towers improve visibility to the rear of the machine.
  • Hydraloc™ System - Brakes and hydraulics are applied automatically whenever the operator raises the restraint bar, leaves the operator's seat or switches off the ignition.
  • Creature comforts include automatic dome light, cup holder, 12-volt outlet, storage tray and multiple adjustable air vents. 
R134 ROPS/FOPS

Hydraulics

The R134 has amped-up hydraulic systems which incorporate intuitive design for precise controllability.

  • Standard proportional auxiliary hydraulic control gives the operator the ability to adjust attachment speeds with infinitely adjustable flow control.
  • Attachments changes are clean and easy with flat-faced quick couplers that allow for changes by hand instead of tools.
  • Hardened chrome cylinder rods resist pitting, rusting and scratching, extending the life of the cylinders.
Auxiliary Hydraulics - Standard 62 L/min
High-Flow Auxiliary Hydraulics - Option N/A
Reservoir Capacity 30 L

Serviceability

Excellent service access and quality components pair up to provide durable machines that are easy to maintain.

  • Large engine cover is hinged and positioned by gas-springs to assist lifting and holding in place, and allows for easy return to closed/operating position.
  • Swing-out rear door easily opens on hinges, allowing full access to filters and fluid reservoirs, for servicing and maintenance.
  • All-new swing-out cooler provides improved access to the engine bay area.
  • Entire ROPS/FOPS assembly tilts rearward with a gas-spring assist for easy internal access to the pumps, hydraulic valve bank and drive motors.
  • All-new cab safety restraint & pull cord safely holds ROPS/FOPS in raised position. 
  • Removable plate for easy cleanout of foot area inside ROPS/FOPS

Specifications

Dimensions

A  Overall Operating Height - Fully Raised 3584 mm
B  Height to Hinge Pin - Fully Raised 2794 mm
C  Overall Height to Top of ROPS 1826 mm
D  Overall Length with Bucket  2652 mm
E  Dump Angle at Full Height 42°
F  Dump Height 2197 mm
G  Dump Reach at Full Height  528 mm
J  Rollback at Ground 29°
M  Rollback Angle at Full Height 99°
O  Seat to Ground Height 853 mm
P  Wheelbase  932 mm
Q  Overall Width - Less Bucket A  1346 mm
R  Bucket Width  1524 - 1778 mm
S  Ground Clearance to Chassis  211 mm
V  Overall Length - Less Bucket  2314 mm
W  Departure Angle 29°
X  Clearance Circle – Front w/ Bucket 1758 mm
Y  Clearance Circle – Front w/o Bucket  1102 mm
Z  Clearance Circle – Rear  1484 mm
Standard Specification Tire Size 10.00 x 16.5 HD

Engine

Make Yanmar
Model 4TNV88 Stage 3A
Gross Power @ 2500 rpm 36.4 kW
Net Power @ 2500 rpm  N/A
Maximum Torque 142 Nm @ 1600
Displacement 2.2 L

Hydraulic System

Auxiliary Hydraulics - Standard 62 L/min
High-Flow Auxiliary Hydraulics - Option  N/A
Reservoir Capacity 30 L

Electrical System

Battery 720 CCA
Starter 12-volt
Alternator 40-amp

Capacities/Weights

Rated Operating CapacityB 612 kg
Rated Operating Capacity with Optional CounterweightB 680 kg
Fuel Tank 47 L
Travel Speed - Maximum 8.7 km/hr
Travel Speed with Two-Speed Option - Maximum N/A
Operating WeightC - Approximate 2087 kg

A - Overall width is dependent upon the amount of wheel offset.

B - Per SAE J818, SAE J732, and ISO 14397

C - Weight of base unit with standard equipment, standard tires (heavy-duty flotation), standard dirt-construction bucket and 79 kg operator.


Options

Control Patterns

Gehl T-Bar Controls - Servo Optional
Hand/Foot Controls - Pilot Optional
Joystick Controls - Pilot

Engine

Engine Auto-Shutdown System Standard
Engine Block Heater Optional
Naturally-Aspirated Engine Standard

Hydraulics

Auxiliary Hydraulics Standard

Operator Station

Restraint Bar with Integrated Armrests Standard
Heating Optional
A/C Standard
High-Back Adjustable Seat Standard
Suspension Seat - Mechanical Optional
Suspension Seat - Air Ride Optional
Cab Enclosure Optional
Foot and Hand Throttles Standard
Full Instrumentation Standard
Horn Standard
Integral Access Plate (Removable) Standard
ROPS/FOPS Level II Overhead Guard Standard
Sound Reduction Material Standard
Work Lights - Front and Rear Standard

Performance

All-Tach® Attachment Mounting System Standard
Power-A-Tach® Attachment Mounting System Optional
Anti-Vandalism Protection Standard
Back-Up Alarm Optional
Brake Control (Auto/Manual) Standard
Counterweight Optional
Hydraglide™ Ride Control N/A
Hydraloc™ Safety System Standard
Hydrostatic Drive - Servo Standard
Lift Arm Support Device Standard
Selectable Self-Leveling Hydraulic Lift Action Optional



Warranty

Gehl stands behind its products with a powerful warranty program. We know that Gehl equipment is put to the test each day, and we engineer and build our equipment to stand up to the challenges they face. To back up our commitment to quality, all Gehl equipment is backed by a twelve month warranty. An extended warranty is available for additional protection to your investment. Read more by clicking on the link to our warranty page below.

Gehl Warranty